1Ki 7:15, 23, 27, 50 | JFB | STEP | 15-22. two pillars of brass of eighteen cubits high-- They were made of the brass (bronze) which was taken from the king of Zobah ( ). In they are said to have been thirty-five cubits high. There, however, their joint lengths are given; whereas here the length of the pillars is given separately. Each pillar was seventeen and a half cubits long, which is stated, in round numbers, as eighteen. Their dimensions in English measure are as follows: The pillars without the capitals measured thirty-two and a half feet long, and seven feet diameter; and if hollow, as Whiston, in his translation of Josephus, thinks ( ), the metal would be about three and a half inches thick; so that the whole casting of one pillar must have been from sixteen to twenty tons. The height of the capitals was eight and three-fourths feet; and, at the same thickness of metal, would not weigh less than seven or eight tons each. The nature of the workmanship in the finishing of these capitals is described ( ). The pillars, when set up, would stand forty feet in height [Napier, Metal].

‏ 1 Kings 7:15

15-22. two pillars of brass of eighteen cubits high--They were made of the brass (bronze) which was taken from the king of Zobah (1Ch 18:8). In 2Ch 3:15 they are said to have been thirty-five cubits high. There, however, their joint lengths are given; whereas here the length of the pillars is given separately. Each pillar was seventeen and a half cubits long, which is stated, in round numbers, as eighteen. Their dimensions in English measure are as follows: The pillars without the capitals measured thirty-two and a half feet long, and seven feet diameter; and if hollow, as Whiston, in his translation of Josephus, thinks (Jr 52:21), the metal would be about three and a half inches thick; so that the whole casting of one pillar must have been from sixteen to twenty tons. The height of the capitals was eight and three-fourths feet; and, at the same thickness of metal, would not weigh less than seven or eight tons each. The nature of the workmanship in the finishing of these capitals is described (1Ki 7:17-22). The pillars, when set up, would stand forty feet in height [Napier, Metal].

‏ 1 Kings 7:23

23-26. he made a molten sea--In the tabernacle was no such vessel; the laver served the double purpose of washing the hands and feet of the priests as well as the parts of the sacrifices. But in the temple there were separate vessels provided for these offices. (See on 2Ch 4:6). The molten sea was an immense semicircular vase, measuring seventeen and a half feet in diameter, and being eight and three-fourths feet in depth. This, at three and a half inches in thickness, could not weigh less than from twenty-five to thirty tons in one solid casting--and held from sixteen thousand to twenty thousand gallons of water. [See on 2Ch 4:3.] The brim was all carved with lily work or flowers; and oxen were carved or cut on the outside all round, to the number of three hundred; and it stood on a pedestal of twelve oxen. These oxen must have been of considerable size, like the Assyrian bulls, so that their corresponding legs would give thickness or strength to support so great a weight for, when the vessel was filled with water, the whole weight would be about one hundred tons [Napier]. (See on 2Ch 4:3).

‏ 1 Kings 7:27

27-39. he made ten bases of brass--These were trucks or four-wheeled carriages, for the support and conveyance of the lavers. The description of their structure shows that they were elegantly fitted up and skilfully adapted to their purpose. They stood, not on the axles, but on four rests attached to the axles, so that the figured sides were considerably raised above the wheels. They were all exactly alike in form and size. The lavers which were borne upon them were vessels capable each of holding three hundred gallons of water, upwards of a ton weight. The whole, when full of water, would be no less than two tons [Napier].

‏ 1 Kings 7:15

‏ 1 Kings 7:23

‏ 1 Kings 7:27

‏ 1 Kings 7:50